- Home
- Pelco Sarix ID30
Overview of Pelco Sarix ID30
The Pelco Sarix ID30-DN8-1 is an indoor fixed-dome IP camera which produces superb low-light security footage at up to 3.1 megapixel resolution, capturing pin-sharp events in near-dark conditions. Day/night switching allows the camera to capture infrared light for brighter low-light footage.
Automatic Back Focus sets the optimum focus for the camera through the web interface for fast, accurate focusing, while the modular design allows the camera to be surface-mounted or recessed into suspended ceilings with no need for additional brackets. Installation times are reduced with support for Power over Ethernet and analog video output.
MicroSD card recording is also available on the Sarix ID30, storing security footage directly to the camera. Additionally, the included recording software can store video to Windows-based PCs at no additional cost.
Note
This camera does not come with a power supply. Should you require a Power over Ethernet midspan please select one form the options above.
Key features and benefits
- The camera is easy to install, featuring automatic back focus and Power over Ethernet support
- The rugged Aluminum and polycarbonate casing can be surface mounted or recessed into suspended ceilings
- High quality megapixel footage lets you capture 10x more detail than conventional VGA quality cameras
- Monitor is possible 24 hours a day with day/night switching
- Store footage without any additional network recording devices using a microSD card
- Included 4-channel Pelco DS4U recording software can record footage to a Windows or Mac computer
- Analog video output available for use with installation tools (additional cable required)
Typical use
The Pelco ID30-DN8-1 would be best suited to larger indoor security installations which require high quality footage in demanding lighting conditions such as banks, post offices, government buildings and department stores.
Compatible recording platforms
- Software: Milestone XProtect
- Network Video Recorders (NVRs): QNAP
Available models
- Pelco Sarix ID10-DN8-1 - Fixed-dome IP camera with 1.3 megapixel resolution
- Pelco Sarix IDE20-DN8-1 - Fixed-dome IP camera with video analytics and 2.1 megapixel resolution
Technical Specifications
Camera |
|
---|---|
Environment | Indoor |
Camera type | Static |
Tamper resistance | No |
Mounting methods | Can be mounted on flat or suspended ceilings |
Horizontal viewing angle | 89-42° |
Motorized focus | Automatic back focus for easy installation |
Lens | 2.8-8mm varifocal lens |
Sensor | 1/3" progressive scan CMOS sensor |
Day/night | Day/night switching (IR sensitive) |
Minimum illumination | Color: 0.5 lux. B/W:0.25 lux (Exposure 1/33s) |
Network | Wired |
Audio support | Audio unit available (call for details) |
Power | 24V AC or IEEE 802.3af PoE (class 3) |
Mobile access | Yes |
Mobile compatibility | Compatible with iPhone and Android-based cell phones |
Video |
|
Resolution | 3 megapixel |
Video format | NTSC & PAL |
Supported resolutions | 2048x1536, 1920x1080, 1600x1200, 1280x1024, 1280x960, 1280x720, 800x600, 640x480, 640x512, 640x352, 480x368, 480x272, 320 x 256, 320x240 and 320x176 |
Aspect ratio | 4:3, 16:9 and 5:4 |
Frame rate | 12fps @ 2048x1536, 15fps @ 1920x1080, 20fps @ 1280x1024, 30fps @ 1280x720 |
Compression | MJPEG and H.264 |
Viewing, detection & recording |
|
Multi-camera viewing | Up to 16 simultaneous cameras |
Privacy masking | 4-window privacy masks |
Simultaneous users | 20 |
Alarm triggers | intelligent motion detection, external input and API commands |
Intelligent video analytics | Adaptive motion detection and tampering detection |
External alarm inputs | 1x alarm input |
Alarm actions | Video recording to MicroSD card and image upload via FTP and email. |
On-board recording | Yes |
On-board recording method | MicroSD memory card |
Recording software included | Pelco 4-channel DS4U recording software |
Connections |
|
Power | Screw terminals for 24V AC |
Network | 10/100Mbps RJ-45 Ethernet connection with PoE support |
IPv6 | No |
Alarm input | Screw terminals for 1x alarm input |
Alarm output | Screw terminals for 1x trigger output |
Other |
|
Dimensions | ø7.95" x 6.32" |
Product weight (Kg) | 0.9 |
Colour | White |
Manufacturer warranty | 3 years |
Operating temperatures | 32-122°F |
Power consumption | <6 W |
Dynamic dns | No |
QoS | Yes |
Protocols supported | TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP) |
Security | Password protection |
ONVIF / PSIA compliant | ONVIF only |
Languages | English, Spanish, French, Italian, Portuguese, German, Russian, Chinese and Turkish |
What's included?
- Back box with camera module
- Surface mount
- Lower dome (including trim ring and bubble)
- Dome liner
- 4-pin alarm connector
- 2-pin power connector
- Quick start guide
- Resource CD
- MAC address labels