Veracity VAD-PP Pinpoint camera setup adapter VAD-PP

Veracity's Pinpoint IP camera configuration adapter solves a common installation problem: how to view the image or config page of an IP camera in-situ, without disconnecting it from the network and losing PoE power? The unit passes PoE power to the camera whilst allowing an additional network device to access the camera directly.
Our price:
€43.00 (Incl. Tax: €51.60)
Veracity | Veracity Pinpoint

Be the first to review this product

Veracity Pinpoint

  • Veracity Pinpoint
  • Veracity Pinpoint installation diagram

Overview of Veracity Pinpoint

This compact adapter allows installers to "break into" Power over Ethernet camera connections, allowing them to connect a laptop to the network right there at the camera for focusing and aiming, while still providing power and data to the IP camera. Using Pinpoint is simple: plug the source cable into the Pinpoint unit, plug the camera into the Pinpoint's RJ45 feed and plug the laptop into the unit's other connector. The camera is then directly accessible from the laptop or other network device.

The unit is compliant with most types of PoE, including IEEE802.3af and 802.3at (High PoE) so is ideal for a range of PoE-powered equipment, including fixed and pan-tilt-zoom cameras as well as wireless access points and access control systems. The unit is powered by the PoE signal sent to the camera, so requires no external power source of its own.

Key features and benefits

  • Create an in-situ network point to aid with the aiming or alignment of PoE-powered network equipment
  • Compatible with most Power over Ethernet standards
  • Requires no external power source for quick and easy connection
  • Helps make installing IP cameras faster and easier for the installer

Typical use

This unit is ideal for use during installation of both static and pan-tilt-zoom IP cameras which are compatible with Power over Ethernet. Installation of PoE-powered devices such as wireless access points and access control systems would also benefit, where manual configuration is required.


  • Network connections: 3x 10/100Mbps RJ-45 Ethernet connections (PoE in, PoE out and data-only out)
  • Power standard: IEEE802.3af, IEEE802.3at, "always-on" and "spare-pair" PoE systems up to 30W
  • Dimensions: 2.6" x 1.3" x 0.8"
  • Weight: 2 oz

Customer Reviews